Tel: +86-592-5659095


ATTN:RoSam Lai

Mobile : 0086-18059859871

Address:3rd Floor, No.82 Middle Guankou Road, Jimei District, Xiamen, Fujian, China

How to install a shower holder?

Installation method of shower holder

The outlet connection of the cooling and heating water pipe in the installation environment of the shower holder is 1/2 inch universal caliber, preferably r1/2 "Taper thread joint, with hot water on the left and cold water on the right. The distance from the center of the joint is about 15cm, and the height of the joint from the ground is recommended to be 60cm.

Installation procedure: Install two shower holder. The shower head is recommended to be 1.2 meters above ground and 1.8 meters below ground.

Shower Holder