Tel: +86-592-5659095
E-mail: salesteam1@uwbath.com

Contact

ATTN:RoSam Lai
E-MAIL: salesteam1@uwbath.com
TEL:86-592-5659095

Mobile : 0086-18059859871

Address:3rd Floor, No.82 Middle Guankou Road, Jimei District, Xiamen, Fujian, China

What is a thermostatic shower faucet, how to install

The standard thermostatic shower faucet has a knob on the right and  left, and the knob on the left adjusts the water temperature and twists  the water temperature down.
Twist back, the water temperature rises, but when it is screwed to 40°C, it will not move. This  is because when the water temperature exceeds 40°C, it can easily scald  the skin. If you need hot water with a higher water temperature, you  must hold down the red safety button on the knob to continue screwing it  back. The  knob on the right controls the water flow mode and the water volume  scale to be screwed forward when the alignment is in alignment. The  water outlet nozzle at the bottom will turn out the water. The greater  the amount of water to be screwed forward, the greater the amount of  water to be screwed backwards. Since  the thermostatic valve core is a very precise device, no matter which  type of valve core is used, the internal machining of the thermostatic  shell also requires very precise. The tolerance of all internal  processing dimensions should be limited to within ±0.1mm. The tolerance  of important dimensions must be Control within ±0.05mm. When  installing, shower should not be bumped with hard objects as much as  possible, do not leave cement, glue, etc. on the surface, so as not to  damage the surface gloss. Special  attention should be paid to removing the debris in the pipeline before  installation, otherwise it will cause the shower to be blocked by the  pipeline debris, which will affect the use.